In case you’re stressed over the health of your vehicle and finding issues in the battery often, then we suggest you to replace the whole unit. We can always provide assistance whenever required even you can schedule it on your required time. Our group of auto service specialists would recommend getting a vehicle battery substitution done in every three to four years. A battery life usually keeps going as long as 3 years, however in these hot temperatures, where the electrolytes of the battery vanish the water faster, you could require one a piece sooner.

We can assist you with:

Oil change
Visual bumper-to-bumper checkup
Air filter cleaning
Coolant, brake fluid, power steering fluid top-up

Wheel balancing is the process of balancing the weight of a tire and wheel assembly so that it travels evenly at high speeds. Balancing requires putting a mounted wheel and tire on a balancer, which centers the wheel and spins it to determine where the weights should go. Every time a wheel is first mounted onto a vehicle with a new tire, it has to be balanced. The goal is to make sure the weight is evenly distributed throughout each of the wheels and tires on a vehicle. This process evens out heavy and light spots in a wheel, so that it rotates smoothly. If there is even a slight difference in weight in the wheels, it will cause enough momentum to create a vibration in the car.

A tire-pressure monitoring system (TPMS) is an electronic system designed to monitor the air pressure inside the pneumatic tires on various types of vehicles. A TPMS reports real-time tire-pressure information to the driver of the vehicle, either via a gauge, a pictogram display, or a simple low-pressure warning light. TPMS can be divided into two different types – direct (dTPMS) and indirect (iTPMS). TPMS are provided both at an OEM (factory) level as well as an aftermarket solution. The goal of a TPMS is avoiding traffic accidents, poor fuel economy, and increased tire wear due to under-inflated tires through early recognition of a hazardous state of the tires. This functionality first appeared in luxury vehicles in Europe in the 1980s, while mass-market adoption followed the USA passing the 2000 TREAD Act after the Firestone and Ford tire controversy. Mandates for TPMS technology in new cars have continued to proliferate in the 21st century in Russia, the EU, Japan, South Korea and many other Asian countries. As of November 2014, fitment rate stands at 54% of passenger cars.

It’s important to test your battery and electrical system regularly, not just when it’s starting to show signs of weakness. Proactively testing it twice a year will help reduce your chances of failure. Fully charged automotive batteries should measure at 12.6 volts or above. When the engine is running, this measurement should be 13.7 to 14.7 volts.

Lead-acid battery technologies have been used in energy storage applications for decades. The purpose of the battery performance testing is therefore to verify claims made by manufacturers about performance, integration, and installation of lithium-ion battery packs, and to disseminate the results to the public.

We know how you assist you exactly when you are facing this situation. Without troubling your vehicle, our experts will handle them in minutes and get your vehicle started. We can give you a free battery and tyre check as well to keep you informed regarding your vehicle’s health, so nothing can stop you from moving. Don’t waste your time, call to our Toll Free No +971 55 690 0656 and let us help you out.